E27 Lamp Gauge List

Writer： admin Time：2020-01-08 04:13 Browse：℃

Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 52 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.

 

Conforms To:

IEC60968-1, IEC60061-3

 

Standard	Product Name
IEC60061-3,7006-27B-1	"Go"gauges for E27 caps on finished lamps
IEC60061-3,7006-28A-1	"Not Go"gauges for E27 caps on finished lamps
IEC60061-3,7006-50-1	Gauge for finished lamps fitted with E27 caps for testing contact making
IEC60061-3,7006-51A-2	Gauge for E27 caps on finished lamps for testing port. Against acc. Contact during insertion
IEC60061-3,7006-51-2	Gauge for caps on finished lamps for testing port. Against acc. Contact E27 51*39
IEC60061-3,7006-27C-1	"Go"gauges for dimension "S1" of E27 caps on finished lamps
IEC60061-3,7006-25A-2	E27 "GO “gauge for lampholders
IEC60061-3,7006-26-4	E27"Not Go"plug gauge for screw threads of lampholders
IEC60061-3,7006-21-5	E27 Gauge for testing port. Against bulb-neck damage and for testing contract making in lampholders
IEC60061-3,7006-22A-4	E27 Gauge for testing contact making and port. Against acc. Contact during insertion
IEC60061-3,7006-22B-1	E27 Gauge for detecting side-contacts with cutting-edges
IEC60061-3,7006-22C-1	E27 Gauge I. for testing resilience of side contact
IEC60061-3,7006-22D-1	E27 Gauge II. for testing resilience of side contact
IEC60238 Fig 11	E27 Test Cap for temperature test 14.4 and 19.3 of IEC60238
IEC60238 Fig 5	E27 Test Cap for torque test clause 18 of IEC60238
IEC60238 Fig 14	E27 Test Cap for resistance to heat test clause 19 of IEC60238