List of IEC standards
Writer: admin Time:2020-01-08 03:42 Browse:℃
This is an incomplete list of standards published by the International Electrotechnical Commission (IEC).
The numbers of older IEC standards were converted in 1997 by adding 60000; for example IEC 27 became IEC 60027. IEC standards often have multiple sub-part documents; only the main title for the standard is listed here.
-
IEC 60027 Letter symbols to be used in electrical technology
-
IEC 60028 International standard of resistance for copper
-
IEC 60034 Rotating electrical machinery
-
IEC 60038 IEC Standard Voltages
-
IEC 60041 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
-
IEC 60044 Instrument transformers
-
IEC 60045 Steam turbines
-
IEC 60050 International Electrotechnical Vocabulary
-
IEC 60051 Recommendation for direct acting indicating analogue electric measuring instruments and their accessories
-
IEC 60055 Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV
-
IEC 60060 High-voltage test techniques
-
IEC 60062 Marking codes for resistors and capacitors
-
IEC 60063 Preferred number series for resistors and capacitors
-
IEC 60061 Lamp caps and holders together with gauges for the control of interchangeability and safety
-
IEC 60064 Tungsten filament type GLS (General Lighting Solutions) bulbs
-
IEC 60065 Audio, video and similar electronic apparatus – Safety requirements
-
IEC 60068 Environmental Testing
-
IEC 60071 Insulation Co-ordination
-
IEC 60073 Basic Safety principles for man-machine interface, marking and identification - coding principles for indicators and actuators
-
IEC 60076 Power transformers
-
IEC 60077 Railway applications - Electric equipment for rolling stock
-
IEC 60079 Explosive Atmospheres
-
IEC 60083 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
-
IEC 60085 Electrical insulation
-
IEC 60086 Primary batteries;
-
IEC 60092 Electrical installations on ships
-
IEC 60094 Magnetic tape sound recording and reproducing systems
-
IEC 60095 Lead-acid starter batteries
-
IEC 60096 Radio-frequency cables
-
IEC 60098 Rumble measurement on Vinyl Disc Turntables
-
IEC 60099 Surge arresters
-
IEC 60119 The Electrical Performance of Semiconductor Rectifiers (Metal Rectifiers)
-
IEC 60134 Absolute maximum and design ratings of tube and semiconductor devices
-
IEC 60137 Bushings for alternating voltages above 1000V
-
IEC 60146 Semiconductor Converters
-
IEC 60156 Dielectric Strength
-
IEC 60169 Radio-frequency connectors
-
IEC 60183 Guide to the selection of high voltage cables
-
IEC 60193 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests
-
IEC 60204 Safety of machinery
-
IEC 60214 On-load tap changers
-
IEC 60228 Conductors of insulated cables
-
IEC 60233 Tests on Hollow Insulators for use in Electrical Equipment
-
IEC 60238 Edison screw Lampholders
-
IEC 60239 Graphite electrodes for electric arc furnaces – Dimensions and designation
-
IEC 60245 Rubber-Insulated Cables
-
IEC 60254 Lead-acid traction batteries
-
IEC 60255 Electrical Relays
-
IEC 60268 Sound system equipment
-
IEC 60269 Low voltage fuses
-
IEC 60270 High-Voltage Test Techniques – Partial Discharge Measurements
-
IEC 60273 Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000V
-
IEC 60287 Calculation of permissible current in cables at steady state rating
-
IEC 60296 Mineral Insulating oils for transformers & switchgear
-
IEC 60297 Dimensions of mechanical structures of the 482.6 mm (19 in) series
-
IEC 60298 high voltage switchgear in metallic enclosure
-
IEC 60308 Hydraulic turbines - Testing of control systems
-
IEC 60309 Plugs, socket-outlets and couplers for industrial purposes
-
IEC 60317 Specifications for particular types of winding wires
-
IEC 60320 Appliance couplers for household and similar general purposes
-
IEC 60331 Tests for Electric Cables under Fire Conditions
-
IEC 60332 Flame Retardant vs Fire Rate Cables
-
IEC 60335 Safety of electrical household appliances
-
IEC 60364 Electrical installations of buildings
-
IEC 60397 Test methods for batch furnaces with metallic heating resistors
-
IEC 60398 Installations for electroheating and electromagnetic processing - General test methods
-
IEC 60417 Graphical symbols for use on equipment
-
IEC 60439 Low voltage switchgear and controlgear assemblies
-
IEC 60445 Basic and safety principles for man-machine interface
-
IEC 60446 Wiring colours
-
IEC 60457 Method of sampling insulating liquids
-
IEC 60479 Effects of current on human beings and livestock
-
IEC 60502 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV)
-
IEC 60519 Safety in installations for electroheating and electromagnetic processing
-
IEC 60529 Degrees of protection provided by enclosures (IP Code)
-
IEC 60539 Directly heated negative temperature coefficient thermistors
-
IEC 60545 Guide for commissioning, operation and maintenance of hydraulic turbines
-
IEC 60546 Controllers with analogue signals for use in industrial-process control systems
-
IEC 60571 Electronic equipment used on rail vehicles
-
IEC 60574 Audio-visual, video and television equipment and systems
-
IEC 60598 Luminaires
-
IEC 60559 Binary floating-point arithmetic for microprocessor systems
-
IEC 60601 Medical Electrical Equipment
-
IEC 60603 Connectors for frequencies below 3 MHz for use with printed boards
-
IEC 60609 Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation
-
IEC 60617 Graphical symbols for diagrams
-
IEC 60622 Sealed nickel-cadmium prismatic rechargeable single cells
-
IEC 60623 Vented nickel-cadmium prismatic rechargeable single cells
-
IEC 60651 Sound level meters
-
IEC 60662 High-pressure sodium lamp - Performance specifications
-
IEC 60664 Insulation coordination for equipment within low-voltage systems
-
IEC 60669 Switches for household and similar fixed-electrical installations
-
IEC 60676 Industrial electroheating equipment - Test methods for direct arc furnaces
-
IEC 60680 Test methods of plasma equipment for electroheat and electrochemical applications
-
IEC 60683 Test methods for submerged arc furnaces
-
IEC 60688 Electrical measuring transducers for converting AC electrical quantities to analogue or digital signals
-
IEC 60694 Common Specifications For High-Voltage Switchgear and Controlgear Standards
-
IEC 60703 Test methods for electroheating installations with electron guns
-
IEC 60708 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
-
IEC 60715 Dimensions of low-voltage switchgear and controlgear. Standardised mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations.
-
IEC 60721 Classification of environmental conditions
-
IEC 60726 Dry type power transformers
-
IEC 60728 Cable networks for television signals, sound signals and interactive services
-
IEC 60730 Class B certification requirements for appliances.
-
IEC 60747 Semiconductor devices; Part 1: General
-
IEC 60748 Semiconductor devices – integrated circuits
-
IEC 60760 Flat, quick-connect terminations (merged into IEC 61210:2010-08)
-
IEC 60774 VHS/S-VHS video tape cassette system
-
IEC 60793 Optical fibres
-
IEC 60779 Test methods for electroslag remelting furnaces
-
IEC 60801 EMI and RFI Immunity
-
IEC 60805 Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines operating as pumps
-
IEC 60809 Filament lamps for road vehicles - Dimensional, electrical and luminous requirements
-
IEC 60811 Common test methods for insulating and sheathing materials of electric cables and optical cables
-
IEC 60812 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
-
IEC 60815 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions
-
IEC 60825 Laser safety
-
IEC 60826 Design criteria of overhead transmission lines
-
IEC 60849 Sound Systems for Emergency Purposes
-
IEC 60865 Short Circuit Current: Calculation of Effects
-
IEC 60870 Telecontrol equipment and systems
-
IEC 60874 Connectors for optical fibres
-
IEC 60884 Plugs and socket-outlets for household and similar purposes
-
IEC TR 60890 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
-
IEC 60898 Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations.
-
IEC 60904 Photovoltaic Devices (Part 1-10).
-
IEC 60906 IEC system of plugs and socket-outlets for household and similar purposes
-
IEC 60908 Compact disk digital audio system
-
IEC 60909 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
-
IEC 60921 Ballasts for tubular fluorescent lamps – Performance requirements
-
IEC 60929 AC-supplied electronic ballasts for tubular fluorescent lamps – Performance requirements
-
IEC 60939 Passive filter units for electromagnetic interference suppression
-
IEC 60942 Electroacoustics – Sound calibrators
-
IEC 60945 Maritime Navigation and Radiocommunication Equipment and Systems – General Requirements – Methods of Testing and Required Test Results
-
IEC 60947 Standards for low-voltage switchgear and controlgear
-
IEC 60950 Safety of information technology equipment
-
IEC 60958 Digital Audio Interface
-
IEC 60994 Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
-
IEC 61000 Electromagnetic compatibility (EMC)
-
IEC 61008 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
-
IEC 61009 Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBO's)
-
IEC 61010 Safety requirements for electrical equipment for measurement, control and laboratory use
-
IEC 61024 Protection of structures against lightning
-
IEC 61025 Fault tree analysis
-
IEC 61030 Domestic Digital Bus - a standard for a low-speed multi-master serial communication bus for home automation applications.
-
IEC 61043 Sound intensity meters with pairs of microphones
-
IEC 61058 Switches for Appliances
-
IEC 61071 Capacitors for power electronics
-
IEC 61084 Cable trunking and ducting systems for electrical installations
-
IEC 61097 Global maritime distress and safety system (GMDSS)
-
IEC 61116 Electromechanical equipment guide for small hydroelectric installations
-
IEC 61131 Programmable Logic Controllers
-
IEC 61140 Protection against electric shock – Common aspects for installation and equipment
-
IEC 61149 Safety of mobile radios
-
IEC 61156 Multicore and symmetrical pair/qud cables for digital communications
-
IEC 61158 Industrial communication networks – Fieldbus specifications
-
IEC 61162 Maritime navigation and radiocommunication equipment and systems, Digital Systems
-
IEC 61164 Reliability growth – Statistical test and estimation methods
-
IEC 61174 Maritime Navigation and Radio Communications, Electronic Chart Display and Information System (ECDIS)
-
IEC 61194 Characteristic parameters of stand-alone photovoltaic (PV) systems
-
IEC 61210 Connecting devices – Flat quick-connect terminations for electrical copper conductors – Safety requirements
-
IEC 61211 Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V - Impulse puncture testing in air
-
IEC 61215 Crystalline silicon terrestrial photovoltaic (PV) modules – Design qualification and type approval
-
IEC 61226 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
-
IEC 61238 Compression and mechanical connectors for power cables for rated voltages up to 30 kV
-
IEC 61241 Electrical apparatus for use in the presence of combustible dust
-
IEC 61277 Terrestrial photovoltaic (PV) power generating systems – General and guide
-
IEC 61280 Field testing method for measuring single mode fibre optic cable
-
IEC 61286 Character set with electrotechnical symbols
-
IEC 61307 Industrial microwave heating installations – Test methods for the determination of power output
-
IEC 61308 High-frequency dielectric heating installations – Test methods for the determination of power output
-
IEC 61326 Electrical equipment for measurement, control and laboratory use – EMC requirements
-
IEC 61334 Distribution automation using distribution line carrier systems - a standard for low-speed reliable power line communications byelectricity meters, water meters and SCADA
-
IEC 61345 UV test for photovoltaic (PV) modules
-
IEC 61346 Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations
-
IEC 61347 Lamp Controlgear
-
IEC 61355 Classification and designation of documents for plants, systems and equipment
-
IEC 61360 Common Data Dictionary
-
IEC 61362 Guide to specification of hydraulic turbine control systems
-
IEC 61363 Electrical installations of ships and mobile and fixed offshore units
-
IEC 61364 Nomenclature for hydroelectric powerplant machinery
-
IEC 61366 Hydraulic turbines, storage pumps and pump-turbines - Tendering Documents
-
IEC 61378 Converter Transformers
-
IEC 61400 Wind turbines
-
IEC 61427 Secondary cells and batteries for renewable energy storage - General requirements and methods of test
-
IEC 61429 Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135
-
IEC TS 61430 Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid starter batteries
-
IEC TR 61431 Guide for the use of monitor systems for lead-acid traction batteries
-
IEC 61434 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Guide to designation of current in alkaline secondary cell and battery standards
-
IEC 61435 Nuclear instrumentation - High-purity germanium crystals for radiation detectors - Measurement methods of basic characteristics
-
IEC TR 61438 Possible safety and health hazards in the use of alkaline secondary cells and batteries - Guide to equipment manufacturers and users
-
IEC 61439 Low-Voltage switchgear and controlgear assemblies
-
IEC 61442 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
-
IEC 61443 Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV)
-
IEC 61445 Digital Test Interchange Format (DTIF)
-
IEC 61452 Nuclear instrumentation - Measurement of gamma-ray emission rates of radionuclides - Calibration and use of germanium spectrometers
-
IEC 61453 Nuclear instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and routine tests
-
IEC 61462 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
-
IEC TS 61463 Bushings - Seismic qualification
-
IEC TS 61464 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregating medium of the main insulation (generally paper)
-
IEC 61466 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V
-
IEC 61467 Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
-
IEC 61468 Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors
-
IEC 61472 Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
-
IEC 61477 Live working - Minimum requirements for the utilization of tools, devices and equipment
-
IEC 61478 Live working - Ladders of insulating material
-
IEC 61479 Live working - Flexible conductor covers (line hoses) of insulating material
-
IEC 61481 Live working - Phase comparators
-
IEC 61482 Live working - Protective clothing against the thermal hazards of an electric arc
-
IEC 61496 Safety of machinery - Electro-sensitive protective equipment
-
IEC 61497 Nuclear power plants - Electrical interlocks for functions important to safety - Recommendations for design and implementation
-
IEC 61499 Function blocks
-
IEC 61500 Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions
-
IEC 61501 Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method
-
IEC 61502 Nuclear power plants - Pressurized water reactors - Vibration monitoring of internal structures
-
IEC 61504 Nuclear power plants - Instrumentation and control systems important to safety - Plant-wide radiation monitoring
-
IEC 61506 Industrial-process measurement and control - Documentation of application software
-
IEC 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems
-
IEC 61511 Functional safety – safety instrumented systems for the process industry sector
-
IEC 61512 Batch control
-
IEC 61513 Functional safety – safety instrumented systems for the Nuclear Industries
-
IEC 61514 Industrial process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
-
IEC 61515 Mineral insulated thermocouple cables and thermocouples
-
IEC 61518 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa)
-
IEC 61520 Metal thermowells for thermometer sensors - Functional dimensions
-
IEC 61523 Delay and Power Calculation Standards
-
IEC 61526 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters
-
IEC 61534 Powertrack systems
-
IEC 61535 Installation couplers intended for permanent connection in fixed installations
-
IEC 61537 Cable management – Cable tray systems and cable ladder systems
-
IEC 61540 Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
-
IEC 61543 Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
-
IEC 61545 Connecting devices - Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units
-
IEC 61547 Equipment for general lighting purposes - EMC immunity requirements
-
IEC 61549 Miscellaneous lamps
-
IEC 61554 Panel-Mounted equipment - Electrical measuring instruments - Dimensions for panel mounting
-
IEC 61557 Equipment for measuring electrical safety in low-voltage distribution systems
-
IEC 61558 Safety of power transformers, power supplies, reactors and similar products
-
IEC 61559 Radiation protection instrumentation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity
-
IEC 61560 Radiation protection instrumentation - Apparatus for non-destructive radiation tests of fur and other cloth samples
-
IEC 61562 Radiation protection instrumentation - Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs
-
IEC 61563 Radiation protection instrumentation - Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs
-
IEC 61566 Measurement of exposure to radio-frequency electromagnetic fields - Field strength in the frequency range 100 kHz to 1 GHz
-
IEC 61577 Radiation protection instrumentation - Radon and radon decay product measuring instruments
-
IEC 61578 Radiation protection instrumentation - Calibration and verification of the effectiveness of radon compensation for alpha and/or beta aerosol measuring instruments - Test methods
-
IEC 61580 Measurement of return loss on waveguide and waveguide assemblies
-
IEC 61582 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment
-
IEC 61584 Radiation protection instrumentation - Installed, portable or transportable assemblies - Measurement of air kerma direction and air kerma rate
-
IEC TS 61586 Estimation of the reliability of electrical connectors
-
IEC 61587 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series
-
IEC 61588 Precision clock synchronization protocol for networked measurement and control systems
-
IEC 61591 Household range hoods - Methods for measuring performance
-
IEC TR 61592 Household electrical appliances - Guidelines for consumer panel testing
-
IEC 61595 Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use
-
IEC TR 61597 Overhead electrical conductors - Calculation methods for stranded bare conductors
-
IEC 61599 Videodisk players - Methods of measuremt
-
IEC TR 61602 Connectors used in the field of audio, video and audiovisual engineering
-
IEC 61603 Infrared transmission of audio or video signals
-
IEC TR 61604 Dimensions of uncoated ring cores of magnetic oxides
-
IEC 61605 Fixed inductors for use in electronic and telecommunication equipment - Marking codes
-
IEC 61606 Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics
-
IEC 61609 Microwave ferrite components - Guide for the drafting of specifications
-
IEC 61610 Prints and transparencies produced from electronic sources - Assessment of image quality
-
IEC 61619 Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography
-
IEC 61620 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
-
IEC 61621 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
-
IEC 61628 Corrugated pressboard and presspaper for electrical purposes
-
IEC 61629 Aramid pressboard for electrical purposes
-
IEC 61631 Test method for the mechanical strength of cores made of magnetic oxides
-
IEC TR 61641 Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due to internal fault
-
IEC 61642 Industrial a.c. Networks Affected by Harmonics – Application of Filters and Shunt Capacitors
-
IEC 61643 Surge protective devices connected to low-voltage power distribution systems
-
IEC 61646 Thin-film terrestrial photovoltaic (PV) modules – Design qualification and type approval
-
IEC 61649 Weibull analysis
-
IEC 61650 Reliability data analysis techniques - Procedures for comparison of two constant failure rates and two constant failure (event) intensities
-
IEC 61660 Short-circuit currents in d.c. auxiliary installations in power plants and substations
-
IEC 61666 Industrial systems, installations and equipment and industrial products – Identification of terminals within a system
-
IEC 61669 Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids
-
IEC 61671 Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML
-
IEC 61672 Electroacoustics – Sound level meters
-
IEC 61674 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
-
IEC 61675 Radionuclide imaging devices - Characteristics and test conditions
-
IEC 61676 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
-
IEC 61683 Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
-
IEC 61685 Ultrasonics - Flow measurement systems - Flow test object
-
IEC 61689 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz
-
IEC 61690 Electronic design interchange format (EDIF)
-
IEC 61691 Behavioural languages
-
IEC 61701 Salt mist corrosion testing of photovoltaic (PV) modules
-
IEC 61703 Mathematical expressions for reliability, availability, maintainability and maintenance support terms
-
IEC 61709 Electric components - Reliability - Reference conditions for failure rates and stress models for conversion
-
IEC 61710 Power law model - Goodness-of-fit tests and estimation methods
-
IEC 61724 Photovoltaic system performance monitoring – Guidelines for measurement
-
IEC 61725 Analytical expression for daily solar profiles
-
IEC 61726 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
-
IEC 61727 Photovoltaic (PV) systems – Characteristics of the utility interface
-
IEC 61730 Photovoltaic modules
-
IEC/TR 61734 Application of symbols for binary logic and analogue elements
-
IEC 61739 Integrated circuits
-
IEC 61744 Calibration of fibre optic chromatic dispersion test sets
-
IEC 61745 End-face image analysis procedure for the calibration of optical fibre geometry test sets
-
IEC 61746 Calibration of optical time-domain reflectometers (OTDR)
-
IEC 61747 Liquid crystal display devices
-
IEC 61753 Fibre optic interconnecting devices and passive components performance standard
-
IEC 61754 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces
-
IEC 61755 Fibre optic connector optical interfaces
-
IEC 61756 Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems
-
IEC 61757 Fibre optic sensors
-
IEC 61758 Fibre optic interconnecting devices and passive components - Interface standard for closures
-
IEC 61760 Surface mounting technology
-
IEC 61770 Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets
-
IEC 61771 Nuclear power plants - Main control-room - Verification and validation of design
-
IEC 61772 Nuclear power plants - Control rooms - Application of visual display units (VDUs)
-
IEC 61773 Overhead lines - Testing of foundations for structures
-
IEC TS 61774 Overhead lines - Meteorological data for assessing climatic loads
-
IEC 61784 Industrial communication networks – Profiles
-
IEC 61786 Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings
-
IEC 61788 Superconductivity
-
IEC 61797 Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers
-
IEC 61800 Adjustable speed electrical power drive systems
-
IEC 61803 Determination of power losses in high-voltage direct current (HVDC) converter stations
-
IEC TS 61804 Function blocks (FB) for process control
-
IEC TR 61807 Magnetic properties of magnetically hard materials at elevated temperatures - Methods of measurement
-
IEC 61810 Electromechanical elementary relays
-
IEC 61811 Electromechanical telecom elementary relays of assessed quality
-
IEC 61812 Time relays for industrial and residential use
-
IEC TS 61813 Live working - Care, maintenance and in-service testing of aerial devices with insulating booms
-
IEC 61817 Household portable appliances for cooking, grilling and similar use - Methods of measuring performance Household portable appliances for cooking, grilling and similar use - Methods for measuring performance
-
IEC 61821 Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits
-
IEC 61822 Electrical installations for lighting and beaconing of aerodromes - Constant current regulators
-
IEC 61823 Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
-
IEC TS 61827 Electrical installations for lighting and beaconing of aerodromes - Characteristics of inset and elevated luminaires used on aerodromes and heliports
-
IEC 61828 Ultrasonics - Focusing transducers - Definitions and measurement methods for the transmitted fields
-
IEC 61829 Crystalline silicon photovoltaic (PV) array – On-site measurement of I-V characteristics
-
IEC TR 61831 On-line analyser systems - Guide to design and installation
-
IEC TR 61832 Design and installation of on-line analyser systems - Guide to technical enquiry and bid evaluation
-
IEC 61834 Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125–60 and 1250-50 systems)
-
IEC 61835 Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format D-5
-
IEC TS 61836 Solar photovoltaic energy systems - Terms, definitions and symbols
-
IEC 61837 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections
-
IEC TR 61838 Nuclear power plants - Instrumentation and control important to safety - Use of probabilistic safety assessment for the classification of functions
-
IEC 61839 Nuclear power plants - Design of control rooms - Functional analysis and assignment
-
IEC 61842 Microphones and earphones for speech communications
-
IEC 61843 Measuring method for the level of intermodulation products generated in a gyromagnetic device
-
IEC 61846 Ultrasonics – Pressure pulse lithotripters – Characteristics of fields
-
IEC 61847 Ultrasonics - Surgical systems - Measurement and declaration of the basic output characteristics
-
IEC 61850 Communication Networks and Systems for Power Utility Automation
-
IEC 61851 Electric vehicle conductive charging system
-
IEC TR 61852 Medical electrical equipment - Digital imaging and communications in medicine (DICOM) - Radiotherapy objects
-
IEC 61853 Photovoltaic (PV) module performance testing and energy rating
-
IEC 61854 Overhead lines - Requirements and tests for spacers
-
IEC 61855 Household electrical hair care appliances - Methods of measuring the performance
-
IEC 61857 Electrical insulation systems
-
IEC 61858 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS)
-
IEC TR 61859 Guidelines for radiotherapy treatment rooms design
-
IEC 61865 Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation
-
IEC 61866 Audiovisual systems - Interactive text transmission system (ITTS)
-
IEC 61868 Mineral insulating oils - Determination of kinematic viscosity at very low temperatures
-
IEC 61869 Instrument transformers
-
IEC 61874:1998 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ('density logging')
-
IEC 61880 Video systems (525/60) - Video and accompanied data using the vertical blanking interval - Analogue interface
-
IEC 61881 Railway applications - Rolling stock equipment - Capacitors for power electronics
-
IEC 61882 Hazard and operability studies (HAZOP studies) - Application guide
-
IEC 61883 Consumer audio/video equipment - Digital interface
-
IEC 61888 Nuclear power plants - Instrumentation important to safety - Determination and maintenance of trip setpoints
-
IEC 61892 Mobile and fixed offshore units – Electrical installations
-
IEC TS 61895 Ultrasonics - Pulsed Doppler diagnostic systems - Test procedures to determine performance
-
IEC 61897 Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers
-
IEC TR 61901 Development tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV)
-
IEC 61904 Video recording - Helical-scan digital component video cassette recording format using 12,65 mm magnetic tape and incorporating data compression (Format digital-L)
-
IEC 61907 Communication network dependability engineering
-
IEC TR 61908 The technology roadmap for industry data dictionary structure, utilization and implementation
-
IEC 61909 Audio recording - Minidisc system
-
IEC 61910 Medical electrical equipment - Radiation dose documentation
-
IEC TR 61911 Live working - Guidelines for installation of distribution line conductors - Stringing equipment and accessory items
-
IEC TR 61912 Low-voltage switchgear and controlgear - Overcurrent protective devices
-
IEC 61914 Cable cleats for electrical installations
-
IEC 61915 Low-voltage switchgear and controlgear - Device profiles for networked industrial devices
-
IEC TR 61916 Electrical accessories - Harmonization of general rules
-
IEC 61918 Industrial communication networks - Installation of communication networks in industrial premises
-
IEC 61920 Infrared free air applications
-
IEC 61921 Power capacitors - Low-voltage power factor correction banks
-
IEC 61922 High-frequency induction heating installations – Test methods for the determination of power output of the generator
-
IEC TR 61923 Household electrical appliances - Method of measuring performance - Assessment of repeatability and reproducibility
-
IEC 61924 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems
-
IEC 61925 Multimedia systems and equipment - Multimedia home server systems - Vocabulary of home server
-
IEC 61926 Design automation
-
IEC TR 61930 Fibre optic graphical symbology
-
IEC TR 61931 Fibre optic - Terminology
-
IEC TS 61934 Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses
-
IEC 61935 Specification for the testing of balanced and coaxial information technology cabling
-
IEC 61936 Power installations exceeding 1 kV a.c.
-
IEC 61937 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958
-
IEC 61938 Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability
-
IEC 61943 Integrated circuits - Manufacturing line approval application guideline
-
IEC TS 61944 Integrated circuits - Manufacturing line approval - Demonstration vehicles
-
IEC TS 61945 Interated circuits - Manufacturing line approval - Methodology for technology and failure analysis
-
IEC TR 61946 Mineral insulating oils - Characterization of paraffinic/naphthenic nature - Low temperature differential scanning calorimetry (DSC) test method
-
IEC 61947 Electronic projection - Measurement and documentation of key performance criteria
-
IEC TR 61948 Nuclear medicine instrumentation - Routine tests
-
IEC TS 61949 Ultrasonics - Field characterization - In situ exposure estimation in finite-amplitude ultrasonic beams
-
IEC 61950 Cable management systems - Specifications for conduit fittings and accessories for cable installations for extra heavy duty electrical steel conduit
-
IEC 61951 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells
-
IEC 61952 Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
-
IEC 61954 Static var compensators (SVC) - Testing of thyristor valves
-
IEC TS 61956 Methods of test for the evaluation of water treeing in insulating materials
-
IEC 61959 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries
-
IEC 61960 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications
-
IEC 61964 Integrated circuits - Memory devices pin configurations
-
IEC 61965 Mechanical safety of cathode ray tubes
-
IEC 61966 Multimedia systems -- Colour measurement
-
IEC 61967 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz
-
IEC 61968 Application integration at electric utilities – System interfaces for distribution management
-
IEC 61969 Mechanical structures for electronic equipment - Outdoor enclosures
-
IEC 61970 Application integration at electric utilities – Energy management system application program interface (EMS-API)
-
IEC TS 61973 High voltage direct current (HVDC) substation audible noise
-
IEC 61975 High-voltage direct current (HVDC) installations - System tests
-
IEC 61976 Nuclear instrumentation - Spectrometry - Characterization of the spectrum background in HPGe gamma-ray spectrometry
-
IEC 61977 Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification
-
IEC 61978 Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators
-
IEC 61980 Electric vehicle wireless power transfer (WPT) systems
-
IEC 61982 Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests
-
IEC 61984 Connectors - Safety requirements and tests
-
IEC 61987 Industrial-process measurement and control - Data structures and elements in process equipment catalogues
-
IEC 61988 Plasma display panels
-
IEC 61991 Railway applications - Rolling stock - Protective provisions against electrical hazards
-
IEC 61992 Railway applications - Fixed installations - DC switchgear
-
IEC 61993 Maritime navigation and radiocommunication equipment and systems
-
IEC TS 61994 Piezoelectric and dielectric devices for frequency control and selection - Glossary
-
IEC 61995 Devices for the connection of luminaires for household and similar purposes
-
IEC 61996 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR)
-
IEC TR 61997 Guidelines for the user interface in multimedia equipment for general purpose use
-
IEC TR 61998 Model and framework for standardization in multimedia equipment and systems
-
IEC TR 62000 Guidance for combining different single-mode fibres types
-
IEC TR 62001 High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of A.C. filters
-
IEC 62002 Mobile and portable DVB-T/H radio access
-
IEC 62003 Nuclear power plants - Instrumentation and control important to safety - Requirements for electromagnetic compatibility testing
-
IEC 62004 Thermal-resistant aluminium alloy wire for overhead line conductor
-
IEC 62005 Reliability of fibre optic interconnecting devices and passive components
-
IEC 62006 Hydraulic machines - Acceptance tests of small hydroelectric installations
-
IEC 62007 Semiconductor optoelectronic devices for fibre optic system applications
-
IEC 62008 Performance characteristics and calibration methods for digital data acquisition systems and relevant software
-
IEC TR 62010 Analyser systems - Guidance for maintenance management
-
IEC 62011 Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes
-
IEC 62012 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments
-
IEC 62014 Electronic design automation libraries
-
IEC 62014-4 IP-XACT - Standard Structure for Packaging, Integrating, and Reusing IP within Tool Flows
-
IEC 62014-5 Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs
-
IEC 62023 Structuring of technical information and documentation
-
IEC 62027 Preparation of object lists, including parts lists
-
IEC 62040 Uninterruptible power systems
-
IEC 62041 EMC requirements for power transformers, power supplies, reactors and similar products
-
IEC TS 62046 Safety of machinery - Application of protective equipment to detect the presence of persons
-
IEC 62052 Electricity metering equipment (AC) General requirements, tests and test conditions
-
IEC 62056 DLM/COSEM communication protocol for reading utility meters
-
IEC 62061 Safety of machinery: Functional safety of electrical, electronic and programmable electronic control systems
-
IEC 62068 Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses
-
IEC 62076 Industrial electroheating installations – Test methods for induction channel and induction crucible furnaces
-
IEC 62087 Methods of measurement for the power consumption of audio, video and related equipment
-
IEC 62097 Hydraulic machines, radial and axial - Performance conversion method from model to prototype
-
IEC TS 62100 Cables for aeronautical ground lighting primary circuits
-
IEC 62107 Super Video Compact Disc
-
IEC 62108 Concentrator photovoltaic (CPV) modules and assemblies – Design qualification and type approval
-
IEC 62121 Methods of measurement for minidisc recorders/players
-
IEC 62133 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
-
IEC 62138 Nuclear Power Plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions
-
IEC/TR 62157 Cylindrical machined carbon electrodes – Nominal dimensions
-
IEC 62196 Plugs and sockets for charging electric vehicles
-
IEC 62208 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
-
IEC 62246 Reed switches
-
IEC 62256 Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement
-
IEC 62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
-
IEC 62264 Enterprise-control system integration
-
IEC 62265 Advanced Library Format (ALF) describing Integrated Circuit (IC) technology, cells and blocks
-
IEC 62270 Hydroelectric power plant automation – Guide for computer-based control
-
IEC 62271 High-voltage switchgear and controlgear
-
IEC 62278 Railway applications – Specification and demonstration of reliability, availability, maintainability and safety (RAMS)
-
IEC 62282 Fuel cell technologies
-
IEC 62301 Household electrical appliances – Measurement of standby power
-
IEC 62304 Medical Device Software – Software Life Cycle Processes
-
IEC 62305 Protection Against Lightning
-
IEC 62325 Standards related to energy market models & communications
-
IEC TR 62331 Pulsed field magnetometry
-
IEC 62351 Power System Control and Associated Communications – Data and Communication Security
-
IEC 62353 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
-
IEC/TR 62357 Power system control and associated communications - Reference architecture for object models, services and protocols
-
IEC 62365 Digital audio – Digital input-output interfacing – Transmission of digital audio over asynchronous transfer mode (ATM) networks
-
IEC 62366 Medical devices – Application of usability engineering to medical devices
-
IEC 62368 Audio/video, information and communication technology equipment
-
IEC 62379 Common control interface for networked digital audio and video products
-
IEC 62386 Digital addressable lighting interface
-
IEC 62388 Maritime Navigation and Radio Communications, Shipborne Radar
-
IEC 62395 Electrical resistance trace heating systems for industrial and commercial applications
-
IEC 62420 Concentric lay stranded overhead electrical conductors containing one or more gap(s)
-
IEC 62439 Industrial communication networks - High availability automation networks
-
IEC 62443 Industrial communication networks – Network and system security (DRAFT)
-
IEC 62446 Grid connected photovoltaic systems – Minimum requirements for system documentation, commissioning tests and inspection
-
IEC 62455 Internet protocol (IP) and transport stream (TS) based service access
-
IEC 62464 Magnetic resonance equipment for medical imaging
-
IEC 62471 Photobiological safety of lamps and lamp systems
-
IEC 62474 Material declaration for products of and for the electrotechnical industry
-
IEC 62481 Digital Living Network Alliance (DLNA) home networked device interoperability guidelines
-
IEC 62491 Industrial systems, installations and equipment and industrial products - Labelling of cables and cores
-
IEC 62493 Assessment of lighting equipment related to human exposure to electromagnetic fields
-
IEC 62502 Analysis techniques for dependability – Event tree analysis (ETA)
-
IEC 62505 Railway applications – Fixed installations – Particular requirements for a.c. switchgear
-
IEC 62507 Identification systems enabling unambiguous information interchange - Requirements
-
IEC 62531 Property Specification Language (PSL)
-
IEC TS 62556 Ultrasonics - Field characterization - Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems
-
IEC 62606 General requirements for arc fault detection devices
-
IEC 62680 Universal Serial Bus (USB) interfaces for data and power
-
IEC 62682 Management of alarm systems for the process industries
-
IEC 62684 Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
-
IEC/TR 62685 Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs)
-
IEC 62693 Industrial electroheating installations – Test methods for infrared electroheating installations
-
IEC 62700 DC Power supply for notebook computer
-
IEC 62703 Expression of performance of fluorometric oxygen analyzers in liquid media
-
IEC 62708 Documents kinds for electrical and instrumentation projects in the process industry
-
IEC 62734 Industrial networks - Wireless communication network and communication profiles - ISA 100.11a
-
IEC/TR 62794 Industrial-process measurement, control and automation - Reference model for representation of production facilities (digital factory)
-
IEC/TR 62795 Interoperation guide of field device tool (FDT) / device type manager (DTM) and electronic device description language (EDDL)
-
IEC/TS 62796 Energy efficiency in electroheating installations
-
IEC 62798 Industrial electroheating equipment – Test methods for infrared emitters
-
IEC/TR 62837 Energy efficiency through automation systems
-
IEC/TS 62872 Industrial-process measurement, control and automation system interface between industrial facilities and the smart grid
-
IEC/TR 62914 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Experimental procedure for the forced internal short-circuit test of IEC 62133:2012
-
IEC/PAS 62948 Industrial networks - Wireless communication network and communication profiles - WIA-FA
-
IEC/PAS 62953 Industrial communication networks - Fieldbus specifications - ADS-net
-
IEC 80001 Application of risk management for IT-networks incorporating medical devices
-
IEC 81346 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations