+86-755-33168386  sales@china-gauges.com

Technological innovation

IP Probes, Fingers and Pins The Corresponding Standard

Writer: admin Time:2020-01-08 02:38 Browse:

Description European standards Other standards
JOINTED TEST FINGER EN 60529 FIG. 1 
EN 61032 FIG. 2 
EN 60335-1 
EN 60335-1/A13
23-50 FIG. 21
IEC 60529 
IEC 61032 
IEC 884-1
JOINTED TEST FINGER EN 60335-2-64 Fig. 1
RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50 N EN 60950 
EN 60335-1
IEC 60335-1 Fig. 10
RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50-75 N
RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-100 N EN 61032 Fig. 7 IEC 60065 Fig. 3b
SHORT TEST PIN EN 61032 Fig. 9 
EN 60335-1 
EN 60601-1
IEC 60335-1 Fig. 2
LONG TEST PIN EN 61032 IEC 61032
TEST MANDREL EN 61032 Fig. 16 
EN 60335-1
IEC 60335-1 Fig. 3
TEST NEEDLE Ø 1 mm , force 1 N CEI 23-50 Fig. 10 IEC 883
TEST NEEDLE Ø 2, 5 mm , force 3 N
SHORT CIRCUIT TESTER, 48 V. with signal light EN 60335-1 par. 8.1 IEC 60529 par. 11.89
IEC 60598-1 par. 6.92
TEST SPHERE Ø 50 mm with handle EN 60529 
EN 61032 Fig. 1
IEC 60529 
IEC 61032
TEST NAIL to be applied to the rigid test finger EN 60335-1 Fig. 7 IEC 60335-1 Fig. 7
TEST ROD Ø 2, 5 mm , length 100 mm , with stopping ball Ø 35 mm EN 60529 
EN 61032 Fig. 3
IEC 60529 
IEC 61032
TEST ROD Ø 1 mm , length 100 mm , with stopping ball Ø 35 mm EN 60529 
EN 61032 Fig. 4
IEC 60529 
IEC 61032
TEST PROBE Ø 12 mm , length. 80 mm with dynamometric handgrip and reference marks to forces of 10-20-30 -40-50 N EN 60950 Fig. 16 IEC 61010- par. 8.1.1
SMALL FINGER PROBE Ø 8, 6 mm EN 61032 Fig. 12 
EN 60335-2-75
SMALL FINGER PROBE ? 5, 6 mm EN 61032 Fig. 13 
EN 60335-2-75
IEC61032 IEC60065
ACCESS PROBE TO HAZARDOUS FOOD WASTE DISPOSAL UNITS EN 61032 CEI IEC 61032, FIG. 14 – PROBE 31
TEST BAR WIDTH 50MM, 5MM THICK ,175MM LONG EN61032 IEC 61032 FIG17 PROBE43
TEST BAR WIDTH 3MM, 1MM THICK ,80MM LONG EN61032 IEC 61032 FIG10 PROBE14
TEST NEEDLE Ø 0.5 MM, 20MM LONG EN61032 IEC 61032 FIG11 PROBE17
"UL" FINGER PROBE ACCORDING TO UL 1026,
FIG. 6.2 ,UL508 ,FIG.6.4,
UL153,FIG23.1;UL 982, 
FIG. 7.1 UL507 FIG9.2, 
UL1310-1994
HAZARDOUS MOVING PARTS PROBE UL507 FIG8.1, PA160B
RIGIDITY TEST ROD PROBE,Ø 25.4 MM UL507 FIG8.2 S2140A
UNINSULATED LIVE PARTS PROBE UL507 FIG1.1
TACCESSIBILITY PROBE/WEDGE UL 60950-1, FIG. NAF.2, FIG. NAF.3
BLUNT-END PROBE UL1310 FIG14.4(S3252)
ENAMELED WIRE PROBE UL1278 FIG 8.2(PA140A),UL398 
FIG 8.2(PA170B) ,UL507(PA170D)
TEST HOOK CEI EN 60601-1, 
FIG. 1 UL 6500, FIG. 8.2
ULTEST FINGER
UL TEST PROBE UL1287 FIG,10.1
UL TEST PROBE UL1287 FIG,10.2
UL TEST PROBE UL1287 FIG,10.3
UL TEST PROBE UL1287 FIG,10.4
JOINTED IEC TEST FINGER IEC6 0335-2-14
JOINTED IEC TEST FINGER (Ø 125MM)
TEST PROBE PROBE32 IEC61032
IEC STEEL ROD Ø 4 MM, 100 MM LONG EN61010-1 EC60065 9.1.3, IEC1010
IEC STEEL ROD Ø 3 MM, 100 MM LONG EN61010-1,CSA1010-1 IEC1010, ,UL31010-1
TEST PORBE ABOUT IEC60950 IEC60950
TEST PORBE ABOUT IEC60601 IEC60601
TEST PORBE ABOUT IEC61010 IEC61010
TEST PORBE ABOUT IEC60335 IEC60335
TEST PORBE ABOUT IEC60529 IEC60529

CONTACT US

Contact: Nina She

Email: sales@china-gauges.com

Tel: +86-755-33168386

Skype: nina.she@outlook.com

Address: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China